Folding Pocket Set

I’ve purchased several jackknife sets and this on hands down was the cleanest and best quality one straight out of the package! No burrs didn’t need polished or sanded and it just works. The locking mechanism is probably my favorite out of all of the ones I own. And the “feel” for the pins is almost as good as a full-size pick.

The lever action locks the picks in place super well! They even threw in a few freebies.

This is my second purchase of this product. I enjoyed mine so much and have it as an every day carry, that I bought another as a gift for a friend. She is as pleased as I have been. As long as you set your locking screw correctly on this, it can be as solid as a stand alone pick. Their customer service this time around was, as usual, top notch. I will continue to be a customer for myself and gifts. Next thing will be to try that CRT-2 tension tool! I've never owned one before, but with quality I've experienced here, I'd try anything they make.

I genuinely like this very affordable little bugger. I carry it every day along with my pocket knife, which works well with the keyring hole on the handle to hold the two together on a little lanyard. The ONLY thing I would change is the thickness of the picks. I for one wouldn't mind if the set was even .5" wider to accommodate better steel. That would make this a solid 5 stars.

I like this tool. It is smaller than I thought but I like the size. It fits well. I do not feel a difference if I use this tool vs a pick. I like the .020 thickness. I normally use 0.018 and at times find 0.025 to thick. Provides good feed back too. One think I would like to see changed is be able to add 1 or 2 more tension wrenches. 0.050, 0.040,( must have)and 0.030(maybe). I have been brain storming of where I can put another tension wrench and how the tension wrench will be constructed. I love TOK vs BOK. Over all, a product I would recommend.

A versatile tool not only for Locksporters but for Locksmiths as well! I have only a couple small qualms to say about this product and a host of praises to say. Firstly let's get out the qualms. Starting with the individual picking tools finish. I'm referring to the machining/tooling artifacts. Note I have seen worse from more expensive Locksmithing Brands. About Four out of the Nine pick profiles needed some TLC with 600-1000 grit dry/wet sandpaper. The other Five pick profiles were ready to rock. Specifically the profiles that need some hand finishing were the .025" Short Hook, .020" Bogota Triple Peak, .020" Euro Hook, and .025" Quint Rake. The finishing of these four profiles took me about 3 to 4 minutes each. The only other issue was the tensioner which it's not a big deal as I have tons of them and keep some custom made ones in my wallet. Now onto the positive aspects. Customer Service is excellent and really suprised me by fulfilling a custom request. I assumed this would have costed a bit more but it didn't. The material used to produce the picks and the Jacknife body is good quality. I did take some time to get acquainted with this tool before using it in the field. I successfully single pin picked some moderately difficult LOTO padlocks with good success. I choose some more difficult locks (Commerical) I had lying around for single pin picking. I raked a few standard Deadbolt cylinders. I was able to successfully use the Half Diamond to open an older Automotive lock. The Triple and Quint peak rakes really put a whopping on a myriad of locks. I forget sometimes to grab my main tool kit which happens more than I'd like it to. So this pocket tool seen some real world use on a few calls. It preformed just as well as a full length lock picking tool does. Even though it is about 3/16" shorter than my HPC and Peterson picks it was fine. I was able to use it in a Lock Out call in which it tackled a Schlage B60N. I'm not heavy handed with my picking tools unless I need be and while picking the Schlage I did have to use some force. I did fear that I was going break the Jacknife but my fears were put aside after a successful open. I didn't notice any vertical flexing and all of the pick tools held position where they were locked in. I later chose to use it purposefully on two other calls. One call in which was a request to open a Weather Gaurd tool box. That particular Customer was interested in the Jacknife so came the opportunity to show him where he could purchase his own. Thus far I am satisfied with my purchase and now my Mentor is chomping at the bit (pun intended) to buy it from me LOL. He'll just have to get his own as I've already became attached to this tool and keep it with me at all times. Ya never know when you might get a call. It's aggravating to have to go switch vehicles or gather up tools. I do reccomend giving the RCS Tool Co Pocket Pick/Jacknife a try. For the price its certainly worth it.

This thing is awesome! The plastic model is super light weight, and the locking bar is WAY better than the small bolt that other models use (like the aouthord jack knife pick set). Satisfied enough I ordered a second one for a family member who is deployed! It's good to know that if he needs to it can be sent in for repair or replacement! I would say get one, but you may end up getting two! One of my favorite pocket sets! ?

I have been testing this for a bit and it is by far the best pocket set you can get! The ability to customize if you want along with he quality of the build make it second to none. You will not regret this purchase!

I absolutely love these! I ordered 2 (one for single-pin picking and one mostly for raking) and use them all the time. I'm a locksmith and these are very convenient for basic locks (Kwikset & cam locks). I had received the wrong picks from what I had requested, but the company had great customer service and promptly sent me the correct ones. The locking bar to keep the picks from moving is helpful, as you can still feel the pin feedback, as opposed to the freely moving picks on other pocket pick sets. My only gripe is the tension wrench. It won't fit properly in some keyways, but there's not much of a workaround for that, given that it's the only style that would feasibly fit into the handle. I just carry a couple alternative tension wrenches with me to accommodate more keyways. Would definitely order again. May even get some for my team for Christmas with the reasonable price on these, as well as an upgraded 8-pick aluminum set for myself.